|
|
Drill EDM, CNC EDM Drill, EDM Drill, Small Hole Drill
KTH-305CNC
CNC Drilling Electric Discharge Machine - CNC SERIES
Features:
- Precision servo motors on X,Y,Z axes provide excellent stability during drilling.
- Provide 1μ optical scale, linear slideway and ballscrew ensure very accurate movements.
- C type structure.
- NC program G-code and DXF files could be directly read; Automatically finds the start cutting point and begins a fine hole drilling process.
- The machining coordinate can be input directly when NC program is not available.
- Automatic edge, internal diameter finding, and centering.
- Coordinates can rotate at any angle.
- Mirror image function.
- Drilling capacity from 0.2 mm to 3.0 mm diameter brass or copper electrode tubes.
- Automatic illustrates the path of current and next drilling position with color.
- Z axis auto reset and depth calculation. (Z axis automatically checks depths of holes, and returns to complete any that are too shallow.)
- Data could be input by USB, or transfer through RS232 transmission and network.
- Direct and easy learning dialogue operation interface.
Specifications
| DIMENSIONS |
|
KTH-305CNC |
| Work table dimension |
mm |
500 × 300 |
| Max. Workpiece dimension |
mm |
990 × 490 |
| Table travel X/Y |
mm |
350 × 250 |
| Z axis travel |
mm |
350 |
| Ram servo travel |
mm |
350 |
| Max. Length of electrode |
mm |
400 |
| Min. Electrode diameter |
mm |
Ø0.2~Ø3.0 |
| Max. Workpiece weight |
kgs |
150 |
| Dielectric |
- |
Water |
| Capacity of dielectric |
litres |
20 |
| Machine weight (nw/gw) |
kg |
900 / 1000 |
| Packing dimension |
mm |
1300 × 1500 × 2240 |
| Machine structure |
- |
C-type |
| - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
| Max. Current |
A |
25 |
| Peak current setting (ip) |
steps |
6 |
| Pulse on-time setting |
steps |
9 |
| Pulse off-time setting |
steps |
9 |
| High volts |
steps |
3 |
| Power input |
V |
220/ 380/ 415 |
| Max. Rating power |
KVA |
4 |
Accessories
| STANDARD ACCESSORIES |
CNC DRILLING EDM |
| Precision electrode collet jig Ø0.1~Ø3.0mm |
 |
| Electrode pipe guide Ø1.0mm |
|
| Electrode tube Ø1.0mm × 10 |
|
| Halogen work lamp |
|
| Tool box × 1 |
|
| Filter × 2 |
|
| Parallel block 1set |
|
| X, Y, Z axis precision ball screw |
|
| Auto pressure release pump × 1 |
|
| X, Y, Z axis precision servo motor |
|
| 1μ 2 axis optical scale and LCD |
|
| X, Y, Z axis hand wheel |
|
| USB |
|
| RS232 transfer |
|
- Page Top -
|
Copyright© Kontec Precision Industrial Co., Ltd.
Headquarters: No.116, Wenshan 9th St., Nantun Dist., Taichung City 408, Taiwan / TEL: +886-911-551656 / FAX: +886-2-2208-3589 / Contact: Gloria Lin |
