Drill EDM, CNC EDM Drill, EDM Drill, Small Hole Drill
Home > Products > KTH-200
KTH-200
Drilling Electric Discharge Machine - MANUAL SERIES
Features:
- Capable of drilling at any angle, into curved surfaces, and irregular shapes.
- Precision servo motor control for stable drilling.
- Designed for drilling hardened tool steel, carbides and other conductive materials.
- Suitable for small workpiece and components.
- Drilling capacity from 0.15 mm to 3.0 mm diameter brass or copper electrode tubes.
- Automatic pressure release function is used in the system.
- The long life worktable is made of stainless steel.
Specifications
| DIMENSIONS | KTH-200 | |
| Work table dimension | mm | 460 × 210 |
| Max. Workpiece dimension | mm | 630 × 420 |
| Table travel X/Y | mm | 300 × 200 |
| Z axis travel | mm | 350 |
| Ram servo travel | mm | 150 |
| Max. Length of electrode | mm | 400 |
| Min. Electrode diameter | mm | Ø0.2~Ø3.0 |
| Max. Workpiece weight | kgs | 80 |
| Dielectric | - | Water |
| Capacity of dielectric | litres | 20 |
| Machine weight (nw/gw) | kg | 500 / 600 |
| Packing dimension | mm | 1240 x 1210 x 2240 |
| - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - | ||
| Max. Current | A | 25 |
| Peak current setting (ip) | steps | 6 |
| Pulse on-time setting | steps | 9 |
| Pulse off-time setting | steps | 9 |
| High volts | steps | 3 |
| Power input | V | 220/ 380/ 415 |
| Max. Rating power | KVA | 4 |
Accessories
| STANDARD ACCESSORIES | MANUAL DRILLING EDM |
| 5μ 2 axis optical scale and monitor |  |
| Precision electrode collet jig Ø0.1~Ø3.0mm | |
| Electrode pipe guide Ø1.0mm | |
| Electrode tube Ø1.0mm × 10 | |
| Halogen work lamp | |
| Tool box × 1 | |
| Filter × 2 | |
| Parallel block 1set | |
| X, Y, Z axis precision ball screw | |
| Auto pressure release pump × 1 | |
| X, Y, Z axis precision servo motor | Z axis |
* The manufacturer reserves the right to modify the design, specification, mechanisms, …etc. of the machine without notice, all the specifications shown above are just for reference.