We Sell Direct from Taiwan ONLY, NO Authorized Agents in China.
DRILL EDM
Automatic 16 & 30 copper tube changers available.
Precision servo motors on X,Y,Z axes provide excellent stability during drilling.
Provide 1μ optical scale, linear slideway and ballscrew ensure very accurate movements.
Spindle shaper head, X & Y axes motion on head, fixed bed; for automotive applications and other small bore machining on sheet metal molds/dies.
Automatic copper tube deviation correction.
NC program G-code and DXF files could be directly read; Automatically finds the start cutting point and begins a fine hole drilling process.
The machining coordinate can be input directly when NC program is not available.
Automatic edge, internal diameter finding, and centering.
Coordinates can rotate at any angle.
Mirror image function.
Drilling capacity from 0.2 mm to 3.0 mm diameter brass or copper electrode tubes.
Automatic illustrates the path of current and next drilling position with color.
Z axis auto reset and depth calculation.
(Z axis automatically checks depths of holes, and returns to complete any that are too shallow.)
The flushing medium used by this machine is distilled water - environment friendly.
Data could be input by USB, or transfer through network.
Direct and easy learning dialogue operation interface.
| Dimensions | KTC-630ATC | |
| Work table dimension | mm | 660 × 490 |
| Max. Workpiece dimension | mm | 1185 × 740 |
| Table travel X/Y | mm | 600 × 300 |
| Z axis travel | mm | 350 |
| Ram servo travel | mm | 350 |
| Max. Length of electrode | mm | 400 |
| Min. Electrode diameter | mm | Ø0.2~Ø3.0 |
| Max. Workpiece weight | kgs | 500 |
| Dielectric | - | Water |
| Capacity of dielectric | litres | 100 |
| Machine weight (nw/gw) | kg | 2100 / 2300 |
| Packing dimension | mm | 2300 × 1800 × 2240 |
| Machine structure | - | Traveling Head |
| - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - | ||
| Max. Current | A | 25 |
| Peak current setting (ip) | steps | 6 |
| Pulse on-time setting | steps | 9 |
| Pulse off-time setting | steps | 9 |
| High volts | steps | 3 |
| Power input | V | 220/ 380/ 415 |
| Max. Rating power | KVA | 4 |
| Standard Accessories | ATC Drilling EDM |
| Electrode pipe guide Ø1.0mm | – |
| Electrode tube Ø1.0mm × 10 | – |
| Halogen work lamp | – |
| Tool box × 1 | – |
| Filter × 2 | – |
| Parallel block 1set | – |
| X, Y, Z axis precision ball screw | – |
| Auto pressure release pump × 1 | – |
| X, Y, Z axis precision servo motor | – |
| 1μ 2 axis optical scale and LCD | – |
| X, Y, Z axis hand wheel | – |
| USB | – |
| RS232 transfer | – |
| X, Y, Z axis linear guideway | For KTC 430 and above |
| Electrode auto change system | – |
| Collet | – |
* The manufacturer reserves the right to modify the design, specification, mechanisms, …etc. of the machine without notice, all the specifications shown above are just for reference.